Distinctive points:
  
KATS 8077 is a concentrated form of water-based remover for KATS temporary coatings, which are typically used to protect vehicles, machines, etc. during transport.
  
The coating that is to be removed should remain wet during the removal process; therefore, do not work in direct sunlight during hot weather. The ideal temperature should be 16° - 27°C.
  
Apply KATS 8077 in a well-ventilated area without excessive wind.
  
Apply KATS 8077 to the coated surface, diluted with 6 parts water by volume. Use a handheld compression sprayer or a KATS Decoater™ Applicator, available from KATS. Work from top to bottom.
  
The coating will become white or gray as it absorbs the remover and slumps from the surfaces. DO NOT ALLOW THE COATING TO DRY DURING THE REMOVAL PROCESS. In hot, dry, windy weather or where the coated item is large, it may be necessary to have several people working at the same time or remove the coating in sections.
  
Once the coating is removed, rinse off any residue of KATS 8077 thoroughly with clean water.
  
This is particularly important around headlights and taillights to prevent any potential stress crack due to the residue.